$ sudo apt-get update
$ sudo apt-get install motion
$ sudo apt-get install libv4l-0
$ sudo apt-get install uvccapture
$ gedit /etc/default/motion
change "start_motion_daemon yes" (from "no")$ sudo apt-get install motion
$ sudo apt-get install libv4l-0
$ sudo apt-get install uvccapture
$ gedit /etc/default/motion
$ gedit /etc/motion/motion.conf
change daemon on (from "off")
stream_localhost off (from "on")
framerate 100 (from "2")
stream_maxrate 10 (from "1")
$ service motion start
$ motion start
$ motion start
In order to stop:
$ motion stop
$ service motion stop
$ service motion stop
Open web browser, input address: 192.168.1.71:8081
(note: 192.168.1.71 is Raspberry IP address)
Here we go:
View camera on Internet
Port forwarding for Router
Come in 192.168.1.1 with user: admin / password: (back side of Router)
Configure as below picture (where 192.168.1.71 is Raspberry IP)
Come to site: http://portchecker.co/check to check if the port is opened or not
If yes, then Google router IP address (ex: 1.54.30.198)
Open web browser, type: http://1.54.30.198:8081/ ---> the camera can view through Internet around the world!
You might also like:
1. Raspberry pi - remote control car camera
This project will make remote car control which can view camera attached on car.
It will need:
Hardware side:
1. Car toy
2. Two gear motor
3. Raspberry B+
4. Wifi dongle
5. Power bank (10A) (for Raspberry board)
6. Battery (for gear motor)
7. H-bridge circuit (L298N)
2. Rasbperry pi - FFmpeg install and stream to web
Following tutorial will show how to install FFmpeg into Raspberry Pi, then stream video to Local web which can be access through Computer/Phone/Tablet
thanks it is worked.
ReplyDeleteglad to hear that :)
DeleteVery helpful thanks! Is there a way to make the motion display window larger or with better resolution?
ReplyDeleteI can't stream on web browser... What's go wrong..?
ReplyDeleteHi, you did as above instruction? Please try more
DeleteIs this solution ONVIF compliant? I want to use other ONVIF viewers with multiple cameras so good or bad, I'm seeking ONVIF solution.
ReplyDeletevery nice,Keep writing the same articles..
ReplyDeleteMcx Free Trial
nicely explained article..
ReplyDeleteSure Commodity Tips
Does this work with a raspberry pi 2
ReplyDeleteCan this be configured to give out its own wifi network?
This project is done at Rasp Pi2. At end of article, you even view Camera through Internet by Port forwarding.
DeleteGood content, I trust this is a good weblog about Wish to see refreshing content material next time. Thanks for sharing this publish with us.Battery Operated Ultrasonic Level Sensor
ReplyDeleteThe blog article very surprised to me! Your writing is good. In this I learned a lot! Thank you!
ReplyDeletePhD Thesis Writing Services, Dissertation Writing Services & Research Paper Writing Services
Your post was very nicely written. I’ll be back in the future for sure! Aja
ReplyDeletemy video can't save T.T
ReplyDeleteSorry, i didnt get your mean so much. This just shows cam into Network, not for recording
DeleteAlthough I landed on this page accidentally while I was looking for Experienced Research proposal Editors, I have learned a lot about the web camera and I will download the application and find out how it works. Thanks so much for sharing this article with us. I have found it to be very informative.
ReplyDeleteAny tutorial on motion? The analysis is awful.
ReplyDeleteIf the port not open,How open it?
ReplyDeleteA fuel go along with the flow meter is probably capable of delivering the actual gas that changed into ate up in actual time and this informational statistics
ReplyDeleteI hope I will read more such posts.
ReplyDeleteItalian Dental Clinic In Clapham Junction
Impartial and fair blog, making it pleasurable for the gathering of people to peruse.
ReplyDeleteinstall-a-wireless-webcam
I have learned a lot about the web camera and I will download the application and find out how it works
ReplyDelete